Winter is a great time to make your Wooden Surfboard

With our beautiful sunny days and mild temperatures, Winter is the perfect time to make your own surfboard.

In our 4 day class July 18 - 21 inclusive you will master the art of creativity and be guided in all processes on making your board.

Whether this is your first foray into making a board or you are expanding your quiver - our classes factor in every possibility .

We have only a few spots left in this class - so best to act now and enrol to make the surfboard of your dreams.

And as for the end result - we will just leave these here…

But dont take our word for it …

Actions speak louder than words

Our July Wooden Surfboard Making Workshop is on July 18 and runs for four days , finishing on a high note of surboard completion on July 21

For all the good deets , contact us today

Our first Winter Surfboard Making workshop for 2023

What better day to start our Surfboard Making workshop than the first day of winter.

Beautiful crisp sunny days provided the perfect backdrop for 4 days of fun and learning with our amazing board students.

Our eager crew were keen to learn the fundamentals of woodworking - delving into the mechanations of how a wooden surfboard is assembled, how to complete the perfect glue up , the importance of shaping your board just so - that it becomes the board you want to in the water and realising that the better you sand your board the better the finish will adhere to it - and everyone wants a shiny glossy board . And what better way to showcase those glorious timber grains than with a premium resin finish.

So after 4 fabulous days in the workshop, our students achieved what they set out to do - to make a beautiful hollow wooden surfboard.

So now, the glassing process begins and those wonderful wooden surfcrafts will take on a beautiful new dimension …

It is our absolute joy to share our love and knowledge of all things woodworking - and well surfing , thats the icing on the cake

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

In photos ... Our November 2019 Surfboard Making Workshop

There is nothing like ending the year on a high and that is exactly what we accomplished in our November Surfboard Making Workshop.

Its been a brilliant year for learning , we have so enjoyed sharing our knowledge of woodworking and combining it with our passion for surfing. To date we have helped over 160 students create wonderful hollow wooden surfboards. Many of these students have had no woodworking experience whatsoever and yet in 4 productive days they have come away with something wonderful , tangible evidence of their enthusiasm for learning.

Our November class was held just last week November 14 - 17 inclusive and included 2 return students who wanted to expand on their wooden surfboard quiver.

All smiles from Phil, back to make his second wooden surfboard with us

A more exciting use for pegs.

Team work and framwork

Discussion and productivity , getting on with things but still time to chat of course about surfing

Smiley Phil once again showing how happy he is to to be here ! We just love that !

That wonderful feeling of accomplishing a successful glue up

An Eye for detail

The peaceful act of Planeing, an integral part of the finished board

The class of November 19 2019 A beautiful array of boards

Our students showed wonderful team work and enthusiasm over the 4 days and laughs and friendships were made.

We often say it but for us its a privilage to be able teach so many students . The smiles , the look and feeling of accomplishment that each and every student has after their surfboard making workshop makes is so worthwhile for us.

We are already prepping these boards for glassing so our keen students can take their works of art in the water, because not only do our boards look the part , they ride like a dream.

We are keen to continue our learning calendar in 2020 with our New Stand Up Paddle Board classes and of course our ever popular Wooden Surfboard Classes as well .

Our mission to learn and inspire is a big part of what we do here at Bywater Design

A little about our Beautiful Surfboards ...

We design our surfboards with a vision of what us as surfers would like in a board. Its not just the visual , although we do think that our surfboards are ridiculously good looking, its about the performance and how they ride in the water.

The Gould

The Gould is a cleaned up older board with a defnite 70’s vibe.

It single fin with a fuller nose outline and a tight pin tail. A low entry rocker with a flat bottom and and chimed rails.

The end result is a beautiful surfboard for all types of surfers in all types of waves .

The Dawn Surfboard

The Dawn is the total package.

A classic all rounder with a concave throughh the nose , flat through the centre and rolled V in the tail.

Its a sweet reliable daily ride, the perfect workhorse

Will handle all conditions from the dribble wave to the ultimate 6 foot clean wave (and dont we wish for more of those .

With the addition of wonderful timbers such as paulownia, cambia ash and cedar and no foam we are proud of the way our boards ride in the water .

Of course, we could go on for pages of all the finer details of our boards, but if you would like more info about our range we would love to hear from you , so send us an email and we will answer any questions you have !

The New Surfboard Fad...

Well we have known for quite a while about the sustainability, the versatility, the many advantages of Creating your own Wooden Surfboard. The Sydney Morning Herald this week has highlighted these very things, that make Bywater Surfboards a wise and ecological choice for creating your perfect surfboard and riding experience...

For further information on our Wooden Surfboards, our classes or if you would like a custom made surfboard, please do not hesitate contact us

Article Source; The Sydney Morning Herald Feb 1 2015

Brisbanes Only Hollow Wooden Surfboard Classes for 2015 - At Bywater Design

HOLLOW SURFBOARD CLASSES FOR 2015 Semester One

THE ONLY WOODEN SURFBOARD CLASSES IN BRISBANE

2 day shaping class

This 2 day shaping class is where all the assembly work is done for you.

You come in and shape your board to your individual requirements, rail shaping and fin placement, and it is ready for glassing after the two days.

Of course Bywater Design offers you the choice of timber, deck patterns, and various board sizes from our catalogue so you are still getting the timber board of your dreams; just the messy assembly work is done for you.

Or the classic

Tuesday night surfboard making class

For those that like to take their time we are offering the 8 week course of 3 hours a night each week to build your board from our components supplied,

Of course Bywater design offers you the choice of timber, deck patterns, and various board sizes from our catalogue so you are still getting the timber board of your dreams, and you get to do all the assembly work, the board is then ready to be glassed.

2 DAY SHAPING CLASS

FEBRUARY; 14 AND 15   (SATURDAY AND SUNDAY)

MAY; 16 AND 17 (SATURDAY AND SUNDAY)

CLASSIC WOODEN SURFBOARD MAKING CLASS

MARCH 3 – TUESDAY NIGHTS FOR 8 WEEKS

MAY 26^TH – TUESDAY NIGHTS FOR 8 WEEKS

As your surfboard is custom made prices will vary but the cost will start from $1100 and vary according to timber, and size choices

For more information; including surf pack, timber catalogue choices and detailed pricing please email us on;

surf@bywaterdesign.com.au

Places are strictly limited so best to act now and reserve your

POSITION IN BRISBANE’S ONLY HOLLOW WOODEN SURFBOARD CLASSES.

Wooden Surfboard Fins from Japan

It was a great delight to see in Australia and in Brisbane Nobuhito Ohkawa (aka Nobbby)  who made a special visit to my workshop.

Nobby makes beautiful wooden surfboards and surfboard fins in Chiba City, just outside of Tokyo .

We have become friends over the last few years, sharing experiences, and  I was lucky enough to see his workshop whilst I was in Japan last year, and I was happy to return the hospitality this week when Nobby made  a visit to our Northgate workshop whilst he was in Brisbane .

Nobby personally delivered my custom made fins which are made from walnut , rock maple and purple heart.

I cannot wait to attach these on to one of my boards and test it out in the water

Pacific Longboarder Magazine...

Thank you to Pacific Longboarder Magazine  for the wonderful article on our Wooden Surfboard Classes;  

For more information please phone us on PH;  3259000

or email us; surf@bywaterdesign.com.au.

Surfs UP